Harddisk installing?
Answers:
just connect the new hard drive with the old one using the same IDE cable, make your Old hard drive as master and the new hard drive as slave, u do that by changing the master/slave selector on each hard drive. no drivers required
for more details check the link below:
pcworld.com
eazy
i would sugest a new sata hard disk
you just buy it and plug it into an empty slot and plug the power cables
http://www.pcmech.com/article/installing...
it'll take all of 5 minutes.. if its IDE make sure the new drive has a setting for SLAVE set, on the jumpers at the back
if its SATA you just plug the cables in..
you can't really mess up as they make the cables only go in one way to stop people putting them in the wrong way..
for ide , just add it to the exsist drive cable. the end of the cable being on the new drive
if u have a cd/dvd drive.. move that to another IDE cable.
you can just use a IDE bus cable which may be in seperate in your cabinet & connects your old harddisk & cdrom. simple if stuck just email me
The answers post by the user, for information only, RunQA.com does not guarantee the right.
More Questions and Answers ...