My PC system won't start at all after i changed my FSB speed from 1066 to 533.?
Answers:
Try clearing the CMOS jumper on the motherboard.
There should be a 3 pin header with a Jumper on it labeled Clear_CMOS or Clear_RTC. Move the jumper from pins 1 & 2 to pins 2 & 3, wait a few seconds and move it back. Then try it again.
Either that, or unplug the computer and remove the little coin battery from the motherboard.
Either of these will load the BIOS defaults. If it does not POST after that, then you might have fried something.
Try resetting the BIOS chip. Look in your mobo or computer user's guide on how to do this. Usually you either remove the battery or short a pair of pins briefly.
Good luck.
There is a jumper in your motherboard that, when shorted for a few seconds (do a minute), will reset your bios to default settings. You should be able to restart OK once this is done.
Resetting the bios, either via jumper or cmos battery removal will do it. I have 800 fsb, and have never had an issue with WoW or Everquest2. I don't see how fsb would affect it anyway, it would be more of a video card issue one would think..
The answers post by the user, for information only, RunQA.com does not guarantee the right.
More Questions and Answers ...