Low FPS issue on definite games..?

Hello, I freshly recently upgraded my computer. I own the following now:

*8800GTS 320mb
*AMD 6000+ Dual core (3.0 GHz)
*2 Gigs DDR2 (Dual-Channel)
*700W+ PSU

In any source-based winter sport, I usually get around 90 fps.. if it's running beside nobody on screen. When folks appear on screen, it slows down to around 30! Anyone own any ideas? I'm adjectives out now..

Note: I'm running everything on giant, but with bloom sour..

Answers:
I found a utility by AMD that increased my effective FPS contained by games from this link: http://www.amd.com/us-en/processors/tech... . You want the first report listed, the Processor Optimizer. With dual core processors gone to the motherboard's control it will flood one core until it reaches almost 75% size before switching to the unused core, this optimizer change this so that any new processor request go to the core with the most minuscule usage currently. I gained around a steady 25fps across the board.

Two other issues for lowered frame rate can be caused by illustrious CAS latency memory, depending on the speed of the Dual Channel memory you are using, see if you are using memory rated around 4-4-4-12, if you are using anything above this it can fall frame rate and increase lag as it take longer for data to enter and exit the memory modules. Lastly, though I haven't one-sidedly experimented with this device nonetheless myself, LAG which reduces frame rate and responsiveness can come from your meet people port. Regardless of whether you are using the built into the motherboard network nouns or a supplimental PCI card network nouns, it uses the motherboard and processor to handle background throughput and if the game is intensive, this can slow things down. I hold found and plan on trying out for myself one of these Bigfoot NIC cards, they have 2 similar ones that are self controlling next to built in processors, on card memory and stack flow controllers: http://www.tigerdirect.com/applications/... .

Definitely do the optimizer from AMD, check your memory for it's latency rating, and see if those assistance, after that consider reducing some of your graphics settings in the team game especially if its a multiplayer format, when I used to play EQ1 I could run things on High settings unless I was contained by a raid near 40+ other people, consequently I had to mute all my video settings alot lower because next to that many moving objects contained by close proximity means alot more refreshing of your peak and data congestion.

------- Added Note: In regard to your network interface nouns, without consideration of the Bigfoot scheduled above, make sure you set the net port to Full Duplex 100 or 1000 and get it sour Autosense, what can happen on autosense is as the packet get congested, it can read that as a lower speed and switch from 100 to 10 automatically. By setting it to Full Duplex 100 you are locking it into a specific mode.
It could possibly be the video card not person able to render the graphics at such a elevated rate when multiple characters enter. You could see if the RAM on the card is upgradeable from the manufacturer's site, or see if there are any further features you could disable, or possibly lower your resolution during gameplay.
More Questions and Answers ...