My Computer will not nouns up! (At adjectives!)?

my laptop is window XP and whenever i turn it on a page shows up saying "window was not shut down properly" next i have to select safe and sound mode, start normally etc etc. afterwards when i select one it freezes completly, and does not do anything.

I dont have any disks to recuperate it and i dont know how to enter system recovery short them.

PLEASE HELP I NEED THIS FOR UNIVERSITY!

thanks

Answers:
this is a adjectives problem and theres a few solutions to it
the first is use the safe mode,however start not dangerous mode yourself by tapping the f8 switch as soon as the laptop boots up,you will then see alike screen beside the safe mode prospect,choose safe mode and hopefully it will fully nouns into safe mode(you will know when its going to not detrimental mode as you will see all of the window drivers displayed in order)and when you realize the stage just up to that time the safe mode desktop you will recieve a selection to use the "system restore",choose this by pressing "no",then when the system restore window appears choose the earliest restore point possible,then click subsequent to start the restore
hopefully this will restore the laptops settings to a point when these problems were not around! ,afterwards run a virus and spyware scan to make sure no malware is present surrounded by this restore
another way is to use the window xp"recovery console",The Recovery Console contains a set of powerful tools for fixing plentiful problems that you may be experiencing. There is no mouse functionality or fancy graphical interface and anything that you want to perform will enjoy to be typed in. Knowing exactly what to type and knowing which command to type can be for a moment daunting. The Recovery Console is aimed at more experienced users but there is no pretext why you shouldn't be at least aware of how to access it and how to execute a few basic nouns.
To use and install the Recovery Console in Windows XP you will inevitability your Windows XP - Installation Disk. Place this disk into your CD/DVD Drive and restart your computer. Now you will now want to set your computer to boot from the BIOS.
The following is how to use and install the Recovery Console in Windows XP...
1.When you boot from the compact disc you will have to Press any push button to boot from CD.
2.Now your computer's hardware configuration will be inspected.
3.The Windows Setup will immediately load adjectives files that are needed.
4.Now as we want to enter the Recovery Console, press R.
5.Now you have to choose the Windows Installation that you want to log onto and within most cases this will be:
1: C:\WINDOWS
So type 1 and press Enter.
Then you will have to type your administrator password, so type your password and press Enter.
What Password? If you own no Administrator password then simply press Enter
Command Actions
Command engagements are the actual tools that you can use. There are many of them and to spectacle a list of adjectives the actions:
1.Type: HELP ..Then press Enter.
2.There are heaps commands that can be typed and the following nouns are probably the most used:
chkdsk
fixmbr
fixboot
bootcfg /rebuild
3.The above commands can be used to delete a virus from the Master Boot Record that prevented Windows from loading. You can also go back to the beginning the boot.ini file that may hold become corrupt for one reason or another. You can also scan your knotty drive for errors...
a.chkdsk
chkdsk is short for Check Disk and this command can be used to fix file system errors and physical intricate drive problems. However it cannot actually fix a physical knotty drive problem it can only dot the damaged areas so Windows know not to use them.
At the prompt: C:\WINDOWS>
Type: chkdsk [You can use the switches for different checks]
Now press Enter and your hard disk drive will be checked.
b. fixmbr
At the prompt: C:\WINDOWS>
Type: fixmbr
Now press Enter.
Type: y and next press Enter.
A new MBR will afterwards be written.
c. fixboot
At the prompt: C:\WINDOWS>
Type: fixboot
Now press Enter.
Type: y and then press Enter.
A unsullied boot sector will then be written to the C: fence.
d.bootcfg /rebuild
At the prompt: C:\WINDOWS>
Type: bootcfg /rebuild
Now press Enter and allow it to scan for Windows Installations.
Add installation to boot list? (Yes/No/All): Type: y and next press Enter.
Enter Load Identifier: Type: You can type anything you want that identifies this installation of Windows
Enter OS Load Options: Type: /fastdetect and afterwards press Enter.
This will then do again the boot configuration.
If you need to use the Recovery Console you will other have to boot from the Windows XP disc. However it is possible to install the Recovery Console so that you can select to enter the Recovery Console when you first start your computer. To do this first insert your Window XP CD within the CD/DVD-ROM drive.
Click, Start and then choose Run.
Type: x:\i386\winnt32.exe /cmdcons
[Where is x is the dispatch of your CD/DVD-ROM drive]
Press Enter and this should start the install of the Recovery Console.
When the installation has completed, restart your computer. You should presently be given the option to start the Recovery Console or to start Windows.
The Recovery Console is not one of the easiest tools to use; you hold to know what types of command there are and which one to use. There is simply one reason why you should access the Recovery Console and i.e. to fix a problem that you might be having. Hopefully this guide have given you an insight into the Recovery Console and what it can do. If you find yourself regularly accessing the Recovery Console you would probably be best installing it to some extent than having to boot from the Windows XP disk; as it is quicker.
i hope this have helped,and it may be a obedient idea to print this out to use when running the recouping console
any problems let me know
righteous luck!
When you get to that eyeshade again, try to have it start window normally afterwards if you can get within, run a virus scan then do a defrag on the HDD. That should assistance with the problem.
when you start your computer maintain the (F5) key depressed. this should force a not dangerous start. Then undo what ever happen before things go wrong, Restore, though I don't like it, may relieve

Good luck
i think i can sustain you if your computer is original, but i hold instructions in Spanish, i can translate for you if you want, yust contact me and give an account me if you want my help.
OK try this:

1) Get a blank formatted floppy disk or blank disc

2) Copy the Ntdetect.com and NTLDR files from the I386 folder on the XP CD-ROM to this floppy disk (or from a XP system that is working from c:\ (unhide adjectives hidden files first and see file extensions to be visible).

3) Rename the NTLDR profile to Setupldr.bin if copied from CD-ROM.

4) Create a Boot.ini file contained by Notepad by copying the following and saving to the floppy drive:


[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0...
[operating systems]
multi(0)disk(0)rdisk(0)partiti... Windows XP
Professional" /noexecute=optin /fastdetect

This disk/CD will allow you to bootup the HD. You can consequently do the backups of your information before trouble shooting.

The above instructions apply to XP Professional. I don't use Home edition so I can't help out you on that score.
Hi Phoebe

I regard as the best think to do is to capture it repaired. Try an independent (like me). There might be a recovery wall on the hard drive which you might know how to access which might be capable of restoring your computer in need losing all your documents and that might cure the problem. But near are a lot of mights so it would probably be best if you consult someone experienced contained by faulty computers.
More Questions and Answers ...